Table of Contents
Advertisement
Introduction
1.5
Technical Specification
Table 1-1:
CP6003-SA Main Specifications
FEATURES
CPU
Memory
Page 1 - 10
The CP6003-SA supports the following 2
Quad-core Intel® Core™ i7-2715QE (SV), 2.1 GHz, 6 MB L3 cache
•
Dual-core Intel® Core™ i7-2655LE (LV), 2.2 GHz, 4 MB L3 cache
•
Dual-core Intel® Core™ i5-2515E (SV), 2.5 GHz, 3 MB L3 cache
•
Further processor features:
Up to four execution cores
•
Intel® Hyper-Threading Technology (Intel® HT Technology)
•
Intel® 64 Architecture
•
Intel® Advanced Vector Extensions (AVX) floating point
•
Intel® Turbo Boost Technology 2.0
•
Intel® Intelligent Power Sharing (IPS)
•
System memory interface with optimized support for dual-channel
•
DDR3 SDRAM memory at 1333 MHz with ECC
Integrated 2D and 3D Graphics Engines
•
DMI 2.0 with 5 GT/s and FDI interfaces to the Intel® QM67 chipset
•
One x8 and two x4 PCI Express 2.0 ports operating at 5 GT/s
•
Please contact Kontron for further information concerning the suitability of
other Intel processors for use with the CP6003-SA.
Main Memory:
Up to 16 GB, dual-channel DDR3 SDRAM memory with ECC running at
•
1333 MHz on two SODIMM sockets
Cache Structure:
64 kB L1 cache for each core
•
32 kB instruction cache
•
32 kB data cache
•
256 kB L2 shared instruction/data cache for each core
•
Up to 6 MB L3 shared instruction/data cache
•
Flash Memory:
Two redundant SPI flashes (2 x 8 MB) for uEFI BIOS and controlled by
•
the IPMI controller
Up to 32 GB NAND flash via an onboard Serial ATA Flash module (SSD)
•
Serial EEPROM with 64 kbit
SPECIFICATIONS
nd
generation microprocessors:
ID 1044-9757, Rev. 2.0
CP6003-SA
Advertisement
Table of Contents
