Getinfo; Getver - Teltonika FMB001 User Manual

getparam
setparam
flush
countrecs
fc_reset
towingreact
btgetlist
btgscan
btvisible
btrelease
btunpair
faultcodes
obdinfo
cleardtc
getimeiccid
getvin
getrecord
Setparam and getparam SMS is used to configure device.
Parameter ID consists of 3 or 5 digits. Detailed list of parameters and IDs can be found in
chapter number 5.2 "System parameters"
Example: 'username password setparam 102:0' will disable sleep mode.
Multiple value setting in one sms:
Example: 'username password setparam
configured APN name, APN username and APN password. SMS command of limited to 160
characters.

6.1.1 getinfo

Response details
RTC RTC Time
GPS GPS receiver state. 0 – OFF, 1 – restarting, 2 – ON but no fix, 3 –ON and
operational, 4 – sleep mode
SAT Average satellites
Example: RTC:2017/1/9 14:13 GPS:1 SAT:0

6.1.2 getver

Response details
App Ver Firmware version
Returns selected parameter value
Sets selected parameter value
Redirects device to other server
Returns record number
Resets fuel consumption parameters
Towing reactivation
Returns requested Blue-tooth list(values:0, 1, 2)
Starts Blue-tooth scan(values: none, 1)
Sets Blue-tooth to visible with TMO
Disconnects from current device and pauses auto connect
functionality for TMO
Unpair Blue-tooth device
Fault codes reading from OBD
Returns OBD info. Protocol, VIN, AdaptiveTiming value,
requested PID counter, OBD application state,
available vehicle PIDs, mil status, number of DTCs
Clears a dtc counter and deletes fault codes
Returns imei of device and ICCID of sim card. Response
is sent to SMS/GPRS sender and to number which is
provided in SMS. If no number is provided -> response
is sent only to sender)
Return VIN of the vehicle
SMS command initiates saving and sending of high
priority record
Description
Description
2001:wap;2002:user;2003:pass' will change
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
62