Table of Contents
Advertisement
7.2.4
Verifying QoS Settings
Use the following commands to verify that the QoS values are being respected.
1
Display the QoS DiffServ settings on a specific port such as port 15:
IPO4526GTX#show lldp med-network-policies port 15
2
Display the QoS DiffServ settings on all ports:
IPO4526GTX#show lldp med-network-policies
3
Display the current QoS DSCP values from IP Office to the IP phones:
IPO4526GTX#show lldp neighbor detail
-------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------
Port: 16
Index: 12
ChassisId:
Network address
PortId:
MAC address
SysName:
AVX4A5FD4
SysCap:
TB / TB
PVID:
VLAN Name List: none
Dot3-MAC/PHY Auto-neg: supported/enabled
PMD auto-neg:
10Base(T, TFD), 100Base(TX, TXFD), 1000Base(TFD)
MED-Capabilities: CNDI / CNDI
MED-Device type: Endpoint Class 3
MED-Application Type: Voice
L2 Priority: 6
Med-Power Type: PD Device
Power Priority: High
HWRev: 9640GD01A
SWRev: ha96xxua3_186aS,bin
ManufName: Avaya
AssetID:
October 2012
LLDP neighbor
Time: 0 days, 20:50:35
IPv4
3c:b1:5b:4a:5f:d4
(Supported/Enabled)
PPVID Supported: none
PPVID Enabled: none
(Supported/Current)
DSCP Value: 46
Power Source: FromPSE
Power Value:
FWRev: hb96xxua3_11.bin
SerialNumber: 11N514602678
ModelName: 9640G
Avaya Inc. – External Distribution
IP Office & Ethernet Switching Technical Configuration Guide
192.168.44.17
OperMAUtype:
1000BaseTFD
VLAN ID: 0 (Priority Tagged)
Untagged Vlan, Policy defined
5.6 Watt
avaya.com
32
Advertisement
Table of Contents
