Environment Management (Secure Router 2330 Only); Verifying The Hardware Serial Number; Verifying What Software Version Is Running; Booting From A Network Ftp Server - Avaya 2330/4134 Troubleshooting Manual

Environment management (Secure Router 2330 only)

This section describes how to interpret the sensors. Sensor states are shown by the SYS and
FAN LEDs located on the rear panel of the chassis.
• Temperature Sensors - There is one temperature sensor on the board and the
temperature is sampled every two minutes.
• Fan - The status of the fan is checked every two minutes.

Verifying the hardware serial number

This procedure describes the steps necessary to verify the hardware serial number.
Procedure steps
To show the hardware serial, run the following command:
show system configuration

Verifying what software version is running

This procedure describes the steps necessary to show what software version the system is
running.
Procedure steps
To show the software version, run the following command:
show version

Booting from a network FTP server

You can configure the Secure Router 2330/4134 to boot from a network FTP server.
Procedure steps
1. Enter Configuration Mode:
2. Enter the command to configure boot parameters:
Troubleshooting
configure terminal
Verifying the hardware serial number
August 2013 41