Admin | Fast; Figure 6-8. Admin | Fast Page - Comtec CDM-840 Installation And Operation Manual

CDM-840 Remote Router
Ethernet-based Remote Product Management
6.3.2.3

Admin | FAST

The CDM-840 has a number of optional features that you may activate after you purchase their
unique authorization codes from Comtech EF Data Product Support. Use this page to enter
these Fully Accessible System Topology (FAST) Access Codes.
See Chapter 5. FAST ACTIVATION PROCEDURE for the complete information on
activating your FAST Features via the CDM-840 HTTP Interface.
QoS and Tx and Rx Header and Payload Compression are standard (non-FAST)
operational features for Comtech EF Data's Advanced VSAT Series group of products.
If these features are listed in the FAST Configuration table, they are always indicated
as Enabled.

Figure 6-8. Admin | FAST Page

6–14
MN-CDM840
Revision 3