CDM-840 Remote Router
Introduction
1.3
Features
1.3.1
Physical Description
The CDM-840 Remote Router is constructed as a 1RU-high rack-mounting chassis. Handles at
the front facilitate removal from and placement into a rack. The unit can be freestanding if
desired.
•
Sect. 1.4 CDM-840 Specifications
•
Sect. 2.1 Install the Unit Into a Rack Enclosure
1.3.1.1
Standard Assemblies
CEFD Item No.
PL-0020642
PL-0000714
FS-0000030
1.3.1.2
Optional Assemblies
CEFD Item No.
PL-0000881
PL-0000883
PL-0020644
PL-0000974
PL-0000975
KT-0000168
KT-0000195
Description
CDM-840 Base AC Chassis Assembly
CDM-840 PCB Assembly
Cartridge Fuse, 2.5A 250V AC 5x20mm Slo-Blo, 213 series
Description
CDM-840 100-240V AC unit w/24V DC 90W @ 50°C BUC
Power Supply
CDM-840 100-240V AC unit w/48V DC 150W @ 50°C BUC
Power Supply
CDM-840 Base 48V DC Chassis Assembly
CDM-840 48V DC unit w/24V DC 90W @ 50°C BUC Power
Supply
CDM-840 48V DC unit w/48V DC 150W @ 50°C BUC Power
Supply
Rear-Mounting Support Bracket (4")
Rear-Mounting Support Bracket (10")
1–4
MN-CDM840
Revision 3
Where Installed
–
In CDM-840 chassis
In CDM-840 chassis
Where Installed
In CDM-840 chassis
In CDM-840 chassis
–
In CDM-840 chassis
In CDM-840 chassis
Sides of CDM-840 chassis / rear
of user-supplied mounting rack