Comtec CDM-840 Installation And Operation Manual page 147

CDM-840 Remote Router
Ethernet-based Remote Product Management
• Excess Capacity (0 to 100) – Enter the Excess Capacity data rate percentage to be added to
the SCPC data rate. This setting makes additional bandwidth available for when demand
arises while minimizing Step Up switching events.
ToS Switching Configuration
• Enable – Use the drop-down list to select operation as Disabled or Enabled.
•
Max # of Sessions (per ToS Id) (1 to 127) – Allows setting a limit for the number of active
sessions for a particular ToS switch type. Note that the overall limit for active sessions in the
network is 127.
Click [Submit] to save.
(ToS Rules Table)
The valid operating range for each item in this section is noted in parentheses. From left to right:
Column
Index
Name
ID
Type
SCPC Data Rate
Timeout
•
Change (edit) a ToS Switching Configuration rule – Edit the information for the specific
indexed rule. Click [Change].
•
Delete a ToS Switching Configuration rule – Click [Delete] to delete the specific indexed
rule from the ToS Rules Table.
•
Add a ToS Switching Configuration rule – Enter the information for the new rule. Click [Add
Entry]. The rule will be assigned to the next incremented index number, with [Change] and
[Delete] functionality assigned to the new entry.
Description
The automatically-assigned specific rule internal index number is identified here.
(1 to 20 characters) – Enter a text label for circuit identification.
(1 to 63) – Enter an integer value for the ToS ID.
(64 to 254) – Enter an integer value for the Switch Type to inform the VMS what switching
policy to use.
(16 to 16000) Enter the desired data rate, in kbps, for this service type.
(0 to 60) Enter the timer setting, in seconds, for restoring the home state condition once data
packet flow stops.
6–65
MN-CDM840
Revision 3