Unit Parameters Commands And Queries - Comtec CDM-840 Installation And Operation Manual

CDM-840 Remote Router
Serial-based Remote Product Management
7.3.9

Unit Parameters Commands and Queries

Command Number of
Parameter (Instruction Arguments for
Type Code Command or
& Qualifier) Response to Query
Equipment ID N/A 37 bytes
Description of Arguments
(Note that all arguments are ASCII numeric codes from 48 and 57)
Query only.
Returns the equipment ID and installed options in the form
AAAAssssBCDEFGHIJKsssssssssssssssssss, where:
AAAA=The modem model number (default 0840)
ssss (4 spares)=Installed hardware (default 0000)
BCDEFGHIJKsssssssssssssssssss=Software FAST options, where:
B=Tx Data/Symbol Rate option:
0=Standard: CCM 16 kbps to 256 kbps
1=CCM 16 kbps to 512bps
2=CCM 16 kbps to 1024 kbps
3=CCM 16 kbps to 2048 kbps
4=CCM 16 kbps to 5 Mbps
5=CCM 16 kbps to 10 Mbps
6=CCM 16 kbps to 15 Mbps
7=ACM 37 ksps to 100 ksps (future)
8=ACM 37 ksps to 200 ksps (future)
9=ACM 37 ksps to 400 ksps (future)
A=ACM 37 ksps to 800 ksps (future)
B=ACM 37 ksps to 1200 ksps (future)
C=ACM 37 ksps to 2400 ksps (future)
D=CCM 37 ksps to 4100 ksps (future)
C=Rx Data/Symbol Rate option:
0=Standard: CCM 1 Mbps to 15 Mbps
1=CCM 1 Mbps to 45 Mbps
2=CCM 1 Mbps to 100 Mbps
3=CCM 1 Mbps to 140 Mbps
4=CCM 1 Mbps to 167 Mbps
5=ACM 1 Msps to 5 Msps (future)
6=ACM 1 Msps to 15 Msps (future)
7=ACM 1 Msps to 34 Msps (future)
8=ACM 1 Msps to 47 Msps (future)
9=ACM 1 Msps to 62 Msps (future)
7–22
Response to Query
Command (Instruction Response to Query
(Target to Code & (Target to Controller)
Controller) Qualifier)
N/A EID? EID=AAAAssssBCDEFGHIJ
Ksssssssssssssssssss
(see Description of
Arguments)
MN-CDM840
Revision 3