Comtec CDM-840 Installation And Operation Manual page 75

CDM-840 Remote Router
Updating Firmware
•
(If not already done with File Download > [Open]) Extract the firmware files from the
downloaded *.exe or *.zip archive file with the user-supplied utility program:
o Double-click on the archive file name, and then follow the prompts provided by the
user-supplied utility program. Extract, at a minimum, two files:


4. Confirm availability of the firmware files in the temporary folder.
There are several ways you may view the contents of the temporary folder on a Windows-
based PC:
a) From the Windows Desktop:
•
Double-left-click the "temp" folder saved to the Windows Desktop.
• Use Windows Explorer to locate, and then double-left-click the "temp" folder.
•
Use the 'Browse' window ([Start] > ...Run > [Browse]) to locate, and then double-
click the "c:\temp" folder.
b) Using Command-line:
•
Type "cd c:\temp" at the Command-line prompt to change to the temporary
directory created earlier using Command-line.
•
Type "dir" to list the files extracted to the temporary directory from the
downloaded archive file.
The firmware files have been successfully downloaded and are now available for transfer to
the CDM-840.
FW0000408xx_CDM840.bin – the Firmware Bulk image file (where 'xx' denotes
the revision letter), and
CDM-840ReleaseNotes_v#-#-#-#.pdf – the Firmware Release Notes PDF file
(where '#-#-#-#' denotes the firmware version number).
4–7
MN-CDM840
Revision 3