Comtec CDM-840 Installation And Operation Manual page 136

CDM-840 Remote Router
Ethernet-based Remote Product Management
Column
Header Comp.
Payload Comp.
Click [Add Entry] when done. The index automatically increments to the next available number
when the new route is added.
When in Router Mode, the CDM-840 will not transmit a multicast address in the
Internet control range (224.0.0.0 to 224.0.1.255). It filters the packets.
Delete Route
Enter Route Index to Delete. Click [Delete Entry] to delete the specified route entry from the
route table. Upon deletion, the Route Table index number automatically decrements to the next
available number.
Route Table (Edit)
Use the text boxes and drop-down lists to edit all current Route Table entries, as described
previously for the Add New Route section. Click [Submit Changes] to save. The Route Table
entries will update accordingly.
Description
Use the drop-down list to Disable or Enable Header Compression operation.
Use the drop-down list to Disable or Enable Payload Compression operation.
6–54
MN-CDM840
Revision 3