Comtec CDM-840 Installation And Operation Manual page 327

CDM-840 Remote Router
Appendix K
K.2.2.1 Performance Monitoring via the CDM-840 HTTP Interface
Chapter 6. ETHERNET-BASED REMOTE PRODUCT MANAGEMENT
YOU MAY PROCEED WITH ETHERNET-BASED REMOTE PRODUCT MANAGEMENT,
ASSUMING THAT:
•
YOUR CDM-840 IS OPERATING WITH THE LATEST VERSION FIRMWARE FILES.
•
YOUR CDM-840 IS CONNECTED TO A USER-SUPPLIED, WINDOWS-BASED PC AS
FOLLOWS:
O THE PC SERIAL PORT IS CONNECTED TO THE CDM-840 REAR PANEL
o THE PC ETHERNET PORT IS CONNECTED TO THE CDM-840 REAR PANEL
O THE PC IS RUNNING A TERMINAL EMULATION PROGRAM (FOR OPERATION
•
YOU HAVE NOTED THE CDM-840 MANAGEMENT IP ADDRESS USING THE
CDM-840 SERIAL INTERFACE.
•
YOU HAVE PRUCHASED AND ACTIVATED THE E1 RAN OPTIMIZATION FAST
FEATURE.
The RAN Optimizer collects detailed usage and performance statistics that are accessible from
the CDM-840 HTTP Interface. Error! Reference source not found. shows the CDM-840 HTTP
Interface "splash" page, and the menu tree for accessing this monitoring feature. Page
functionality that is not specific to this operation appears dimmed.
'CONSOLE' PORT WITH A USER-SUPPLIED SERIAL CABLE.
'ETHERNET | MANAGEMENT | FE' ETHERNET PORT WITH A USER-SUPPLIED
HUB, SWITCH, OR DIRECT ETHERNET CABLE CONNECTION.
OF THE CDM-840 SERIAL INTERFACE) AND A COMPATIBLE WEB BROWSER
(FOR OPERATION OF THE HTTP INTERFACE).
K–7
MN-CDM840
Revision 3