Comtec CDM-840 Installation And Operation Manual page 188

CDM-840 Remote Router
Serial-based Remote Product Management
Command Number of
Parameter (Instruction Arguments for
Type Code Command or
& Qualifier) Response to Query
BUC Power N/A 4 byte
Supply
enable
Description of Arguments
(Note that all arguments are ASCII numeric codes from 48 and 57)
Query only.
NOTE: VALID ONLY WHEN THE FSK AND BUC POWER ARE ON.
Returns the BUC temperature, in degrees Celsius, in the form x, where:
x=value from -127 to 127
EXAMPLE: <0/BUT?[cr]
>0000/BUT=15[cr][lf]
7–20
Response to Query
Command (Instruction Response to Query
(Target to Code & (Target to Controller)
Controller) Qualifier)
BUT= BUT? BUT=x
BUT? (see Description of
BUT* Arguments)
BUT#
MN-CDM840
Revision 3