Comtec CDM-840 Installation And Operation Manual page 119

CDM-840 Remote Router
Ethernet-based Remote Product Management
Click [Submit] to save.
Tx ACM Status (List all 880s)
From left to right:
Column
Seconds since last LQRM
Max Seconds since last LQRM
IP Source of last LQRM
Last Reported Es/No
Current MODCOD
Current DataRate
Click the List all 880s hyperlink in the section header to display the CDD-880 Multi Receiver
Routers incorporated into the active Advanced VSAT Network. The page will update to display
this information:
From left to right:
Column
Index
IP
Current State
Last Reported Es/No
Max Seconds Since last LQRM
Click the Configuration | WAN | Mod | ACM page tab to resume use of the HTTP Interface.
Tx ACM Events
In addition to the date- and time-stamp assigned for each event, information is presented in this
read-only section as follows (from left to right):
Column
Reported Es/No
New MODCOD
New Tx DataRate
Click [Clear ACM Events] to clear all ACM statistics from the buffer.
Description
Amount of time (in seconds) since an LQRM (Link Quality Report Message)
message was received from the associated CDD-880 Multi Receiver Router.
Maximum amount of time since the last LQRM message was received.
The source IP Address from where the last LQRM message was received.
Es/No value received in the last LQRM message.
Currently selected MODCOD.
Current data rate based on current symbol rate and MODCOD.
Description
The recognized CDD-880 is automatically assigned this internal index number.
The source IP Address of the CDD-880.
Displays the state as Dead, Active, or Recovery.
Es/No value received in the CDD-880's last LQRM message.
Maximum amount of time since the last LQRM message was received from
the CDD-880.
Description
Es/No value.
Newly selected MODCOD.
New data rate based on new MODCOD and current symbol rate.
6–37
MN-CDM840
Revision 3