Page Functionality Specific To Active Qos Mode - Comtec CDM-840 Installation And Operation Manual

CDM-840 Remote Router
Ethernet-based Remote Product Management
Example #2
QoS Subnet
Remote 1 Management IP Address
Remote 1 Reported Routes
Remote 2 Management IP Address
Remote 2 Reported Routes
Result
Example #3
QoS Subnet
Remote 1 Management IP Address
Remote 1 Reported Routes
Result
Example #4
QoS VLAN ID
Packet Format
Result
6.3.3.2.3.2

Page Functionality Specific to Active QoS Mode

DiffServ (Differentiated Services) Rules Table
This table is accessible only when QoS Control Mode = DiffServ.
10.1.0.0/16
192.168.1.1
10.1.1.0/27
192.168.1.1
10.1.2.0/24
Remote 192.168.1.1 and 192.168.2.1 will be added
10.1.2.0/24
192.168.1.1
10.1.2.0/23
Remote 192.168.1.1 will NOT be added because the 10.1.2.0/23 route
is not completely "covered" by the QoS Subnet.
1000
Packet #1 VLAN ID = 1000
Packet #2 No VLAN
Packet #3 VLAN ID = 1001
Packet #1 will go through the QoS Group and cause the Remote ID for
that Remote to be added to the Remote Sites list. Packet #2 and
Packet #3 do not match and will either go to another QoS Group or fall
to the Default Group.
6–44
MN-CDM840
Revision 3