Comtec CDM-840 Installation And Operation Manual page 187

CDM-840 Remote Router
Serial-based Remote Product Management
Command Number of
Parameter (Instruction Arguments for
Type Code Command or
& Qualifier) Response to Query
BUC PLL N/A 1 byte
Lock
BUC Power N/A 2 bytes
Class
BUC Power BPS= 1 byte
Supply
enable
BUC N/A 2 bytes
Software
Version
Description of Arguments
(Note that all arguments are ASCII numeric codes from 48 and 57)
Query only.
NOTE: VALID ONLY WHEN THE FSK AND BUC POWER ARE ON.
Returns the BUC Phase Lock Loop in the form x, where:
0=Locked
1=Unlocked
9=Not connected
EXAMPLE: <0/BPA?[cr]
>0000/BPA=1[cr][lf]
Query only.
NOTE: VALID ONLY WHEN THE FSK AND BUC POWER ARE ON.
Returns the power level, in watts, for C-Band and Ku-Band in the form xx,
where:
1=2 watts
2=4 watts
3=5 watts
4=8 watts
5=10 watts
6=16 watts
7=20 watts
8=25 watts
9=40 watts
10=60 watts
EXAMPLE: <0/BPC?[cr]
>0000/BPC=10[cr][lf]
Command or Query.
Sets or returns the BUC Power Supply control in the form x, where:
0=Disable
1=Enable
EXAMPLE: <0/BPS=1[cr]
Query only.
NOTE: VALID ONLY WHEN THE FSK AND BUC POWER ARE ON.
Returns the BUC Software Version in the form xx, where:
xx=0 or 15
EXAMPLE: <0/BSV?[cr]
>0000/BSV=15[cr][lf]
7–19
Response to Query
Command (Instruction Response to Query
(Target to Code & (Target to Controller)
Controller) Qualifier)
N/A BPA? BPA=x
(see Description of
Arguments)
N/A BPC? BPC=xx
(see Description of
Arguments)
BPS= BPS? BPS=x
BPS? (see Description of
BPS* Arguments)
BPS#
N/A BSV? BSV=x
(see Description of
Arguments)
MN-CDM840
Revision 3