Comtec CDM-840 Installation And Operation Manual page 183

CDM-840 Remote Router
Serial-based Remote Product Management
Command Number of
Parameter (Instruction Arguments for
Type Code Command or
& Qualifier) Response to Query
Rx
MODCOD
(cont.)
Rx N/A 1 byte
Spectrum
Invert
Rx Symbol RSR= 10 bytes
Rate
Description of Arguments
(Note that all arguments are ASCII numeric codes from 48 and 57)
18=16-APSK 2/3
19=16-APSK 3/4
20=16-APSK 4/5
21=16-APSK 5/6
22=16-APSK 8/9
23=16-APSK 9/10
24=32-APSK 3/4
25=32-APSK 4/5
26=32-APSK 5/6
27=32-APSK 8/9
28=32-APSK 9/10
29=auto (ACM only)
All other codes are invalid.
EXAMPLE: <0/RMC=6[cr]
Query only.
Returns Rx Spectrum Invert in the form x, where:
0=Normal
1=Rx Spectrum Inverted
EXAMPLE: <0/RSI?[cr]
>0000/RSI=1[cr][lf]
Command or Query.
Sets or returns Rx Symbol Rate in the form dddddd.ddd, where:
dddddd.ddd=value, in ksps, from 16ksps to 4.5Msps
EXAMPLE: <0/RSR =002047.999[cr]
7–15
Response to Query
Command (Instruction Response to Query
(Target to Code & (Target to Controller)
Controller) Qualifier)
RSI? RSI? RSI=x
RSI* (see Description of
RSI# Arguments)
RSR= RSR? RSR =dddddd.ddd
RSR? (see Description of
RSR * Arguments)
RSR #
MN-CDM840
Revision 3