Comtec CDM-840 Installation And Operation Manual page 186

CDM-840 Remote Router
Serial-based Remote Product Management
Command Number of
Parameter (Instruction Arguments for
Type Code Command or
& Qualifier) Response to Query
BUC BCH= 4 bytes
Current
High Limit
BUC BCL= 4 bytes
Current Low
Limit
BUC DC N/A 4 bytes
Current
BUC N/A 4 bytes
Voltage
BUC 10 BFR= 1 byte
MHz
Reference
BUC RF BOE= 1 byte
Output
BUC Output N/A 3 bytes
Power
Description of Arguments
(Note that all arguments are ASCII numeric codes from 48 and 57)
Command or Query.
Sets or returns the BUC Current High Limit in the form xxxx, where:
xxxx=value from 0 to 4000 mA, in 100 mA increments
EXAMPLE: <0/BCH=2300[cr]
Command or Query.
Sets or returns the BUC Current Low Limit in the form xxxx, where:
xxxx=value from 0 to 4000 mA, in 100 mA increments.
EXAMPLE: <0/BCL=1200[cr]
Query only.
Returns the value of the BUC DC current in the form xxxx, where:
xxxx=value from 0 to 9999 mA.
EXAMPLE: <0/BDC?[cr]
>0000/BDC=9999[cr][lf]
NOTE: If not available, response is 0000.
Query only.
Returns the value of the BUC Voltage in the form xx.x, where:
xx.x=value from 0 to 64.0 Volts.
EXAMPLE: <0/BDV?[cr]
>0000/BDV=64.0[cr][lf]
Command or Query.
Sets or returns the BUC 10 MHz Reference control in the form x, where:
0=Off
1=On
EXAMPLE: <0/BOE=1[cr]
Command or Query.
Sets or returns the BUC output power enable in the form x, where:
0=Off
1=On
EXAMPLE: <0/BFR=1[cr]
Query only.
Returns the BUC output power level in the form xxx, where:
xxx=value from 0 to 999 dBm, in 0.1 dBm increments.
EXAMPLE: <0/BOL?[cr]
>0000/BOL=45[cr][lf] (returns 4.5 dBm).
RESPONSE NOTE: Returns 0 when FSK and BUC power are not enabled.
7–18
Response to Query
Command (Instruction Response to Query
(Target to Code & (Target to Controller)
Controller) Qualifier)
BCH= BCH? BCH=xxxx
BCH? (see Description of
BCH* Arguments)
BCH#
BCL= BCL? BCL=xxxx
BCL? (see Description of
BCL* Arguments)
BCL#
N/A BDC? BDC=xxxx
(see Description of
Arguments)
N/A BDV? BDV=xx.x
(see Description of
Arguments)
BFR= BFR? BFR=x
BFR? (see Description of
BFR* Arguments)
BFR#
BOE= BOE? BOE=x
BOE? (see Description of
BOE* Arguments)
BOE#
BOL= BOL? BOL=xxx
BOL? (see Description of
BOL* Arguments)
BOL#
MN-CDM840
Revision 3