Reading Data And Post-Processing - Novatel ProPak6 User Manual

Chapter 3
Setting FTP Transfer Mode to Binary
1. Using standard terminal software, open an FTP connection to the receiver.
2. To change to binary mode, enter: BIN
3. To transfer a file, enter: get
 If the FTP connection is lost during the downloading of files, reconnect and begin the
file transfer again. The data files are not removed from internal storage until manually
deleted. If the Propak6 lost power and commands to configure the Ethernet (Chapter 4,
Ethernet Configuration on page 73), Wi-Fi (Section 5.2, Wi-Fi Network Configuration on
page 83), and FTP Server (Section 2.9.2, FTP Server and ICOM Ports on page 33)
were not saved to NVM using the SAVECONFIG command, they must be reconfigured.
Otherwise, the receiver is ready for a connection from client software running on a PC
or other device. When the transfer is successful, files can be deleted issuing the
DOSCMD DEL command or by using the 'del' command from within the FTP client.
3.7.1.6 Stop Logging
Press the Log button (
LOGFILE CLOSE command.

Logging automatically stops when the ProPak6 internal memory is full (4 GB). To avoid
filling internal memory, ensure transferred or no longer needed logs are regularly
deleted.
3.7.2

Reading Data and Post-Processing

Logs can be directed to any of the ProPak6 communication ports and can be automatically generated
when new or changed data becomes available or at regular intervals.
Example:
LOG BESTPOSA ONTIME 1
Data can be collected through NovAtel Connect using the Logging Control Window.
Refer NovAtel Connect within the Help or the .chm file bundled with the software for further logging
details.
60
< . >
FILENAME DAT
) to stop logging (open/close toggles based on the last state) or issue the
ProPak6 Installation and Operation User Manual Rev 4
Operation