Wi-Fi Client Configuration - Novatel ProPak6 User Manual

Chapter 5
5.2.2.1 Multiple AP Configurations
Up to four APs can be configured on the ProPak6. Each AP supports up to 5 Client associations at one
time. The default mode is AP1. Default value settings for AP2, AP3 and AP4 are blank.
1. Follow the first three steps in Section 5.2.2, Wi-Fi AP Configuration on page 84.
2. Issue the WIFICONFIG MODE AP X command, X being 2, 3 or 4 for the additional AP
configurations.
3. Continue following the steps in Section 5.2.2, Wi-Fi AP Configuration on page 84.
4. Repeat as required for a maximum of 4 APs.

Refer to the WIFICONFIG command in the
Manual
5.2.3

Wi-Fi Client Configuration

The ProPak6 can store configurations for a maximum of 16 APs on each Client.
86
(OM-20000129) for command details.
Radio Configuration and Activation
OEM6 Family Firmware Reference
ProPak6 Installation and Operation User Manual Rev 4