Typical Dual Antenna Installation; Gnss Antenna Ports - Novatel ProPak6 User Manual

Chapter 2

1. Mount GNSS antennas (user supplied) on a secure, stable structure with an unobstructed view of the
sky from horizon to horizon. Refer also to Section 2.6.1, Mounting the GNSS Antenna on page 29.
2. Use a coaxial cable (user supplied) to connect an antenna to the TNC ANT1 port and connect a
second antenna to the other TNC ANT2 port on the back face of the ProPak6 (Figure 10).

Install the ProPak6 and the two antennas in the vehicle such that the relative
distance between them is fixed.
26
Figure 9: Typical Dual Antenna Installation
Marked ANT1

Marked ANT2
Figure 10: GNSS Antenna Ports
ProPak6 Installation and Operation User Manual Rev 4


Network
Installation