Connect The Additional Communication Ports On A Propak6; Additional Com Ports On The Propak6 - Novatel ProPak6 User Manual

Installation
2.7.1.1 Seamless Battery Swap
Two batteries can be connected at the same time. If a battery requires charging, it can be removed
without experiencing any power interruption (battery A or B).
2.7.2

Connect the Additional Communication Ports on a ProPak6

In addition to the three COM ports (COM1, COM2 and COM3/IMU) on the back of the ProPak6, there are
four additional COM ports available from the EXP port. To access these ports, connect the ProPak6
Expansion Cable (01019154) to the EXP port. For more information about this cable, see Section A.5.5,
ProPak6 Expansion Cable (NovAtel part number 01019154) on page 123.
Refer to A.5.5, ProPak6 Expansion Cable (NovAtel part number 01019154) on page 123 and Table 21,
ProPak6 Expansion Cable Pin-Out Descriptions on page 123 for pin out details.
ProPak6 Installation and Operation User Manual Rev 4
Figure 12: Additional COM ports on the ProPak6
Chapter 2
COM7
COM8
COM9
COM10
31