I/O Cable Wiring Instructions - Novatel ProPak6 User Manual

A.5.4 I/O Cable (NovAtel part number 01018519, 01019148)
These cables can be used to connect the ProPak6 I/O port. The cables are 2 metres in length, with a
DB9 male connector at one end and tinned and tagged conductors at the other.
The 01019148 cable is similar in function to the 0108519 cable, however each signal is in a twisted pair
with a ground wire to reduce cross talk and improve signal integrity. The 01019148 cable is
recommended when using multiple event lines simultaneously in order to prevent false triggers.
122
Table 20: I/O Cable Wiring Instructions
DB9 Male to
Receiver
P1 Black
P2 Brown
P3 Red
P4 Orange
P5 Yellow
P6 Green
P7 Blue
P8 Violet
P9 White/Grey
Shell Shield
ProPak6 Installation and Operation User Manual Rev 4
Color Code