Display: Contrast, Brightness, Installation Position, Language; Configuration Provider; Error Diagnostics; Restarting The Valve Island - Burkert AirLINE 8652 Series Operating Instructions Manual

12.7 Display: contrast, brightness, installation position,
language
→
Press the menu button twice.
→
Select
Parameter
→
Select the value to be changed.
→
Use menu button to enable processing.
→
Set the desired value with the arrow keys.
→
Confirm the value with the
→
Use Exit to navigate to the highest menu level.
→
Enable settings with
12.8

Configuration provider

Specify whether the valve island will compile the configuration from other devices in the büS network
(config clients) and saves it on the SD card.
This function is only possible if an SD card is present in the device (SD card, see chapter "28 Accessories"
on page 119)
→
Press the menu button twice.
→
Select Parameter
12.9

Error diagnostics

→
Press the menu button twice.
→
Select Diagnosis, confirm.
The error type and error code are displayed.
See chapter "26.5" on page 114 for the description of error codes.
12.10

Restarting the valve island

Some settings require a reboot of the valve island.
→
Maintenance
12.11

Factory reset

→
Maintenance
The factory reset starts, and can take a few seconds.
64
> Display.
menu button.
Maintenance > Restart
> CfgProvid. > Off or On, confirm.
> Restart > Yes
> Fact. reset > Yes
English
Configuration with fieldbus gateway
>Yes.
Type 8652