14.7
Display: contrast, brightness, installation position,
language
→
Press menu button twice.
→
>
Parameter
Display
→
Select value that is to be changed.
→
Use
menu button to enable processing.
→
Set the desired value with the arrow keys.
→
Confirm the value with the
→
Use
Back
to navigate to the highest menu level.
→
Enable settings with
14.8
Configuration provider
Specify whether the valve island will compile the configuration from other devices in the büS network
(config clients) and saves it on the SD card.
This function is only possible if an SD card is present in the device (see chapter "25 Accessories" on page
89 for information on SD cards)
→
Press menu button twice.
→
Select
Parameter
14.9
Error diagnostics
→
Press menu button twice.
→
Select
Diagnostics
The error type and error code are displayed. See chapter 23.7 on page 85 for the description of error codes.
14.10
Rebooting the valve island
Some settings require a reboot of the valve island.
→
Maintenance
>
14.11
Factory reset
→
Maintenance
>
The factory reset starts, and can take a few seconds.
54
menu button.
Maintenance
>
Reboot
>
CfgProvid.
>
Off
or
On
, confirm.
Reboot
>
yes
Factory reset
>
yes
english
> yes.
, confirm.
Type 8652
Configuration with fieldbus gateway