Configuring Pfc Using The Cli - Dell M6220 User Configuration Manual

Hide thumbs Also See for M6220:

Table of Contents

Figure 29-2. PFC Statistics

Configuring PFC Using the CLI

Beginning in Privileged EXEC mode, use the following commands to

configure PFC.

If DCBx is enabled and the switch is set to autoconfigure from a DCBX

peer, configuring PFC is not necessary because the DCBx protocol automatically

configures the PFC parameters.

Configuring Data Center Bridging Features

Enter global configuration mode.

M8024 M6348 M8024-k