Dell M6220 User Configuration Manual page 1005

Command
area-id
area default-cost
integer
area-id
area nssa
area-id
area nssa no-
summary
area-id
area nssa
translator-role {always |
candidate}
area-id
area nssa
translator-stab-intv
integer
area-id
area nssa default-
information-originate
metric-value
[metric
metric-type-
[metric-type
value
]
area-id
area nssa
no-redistribution
exit
exit
area-id
show ip ospf area
Purpose
Configure the metric value (default cost) for the type 3
summary LSA sent into the stub area. Range:
1–16777215)
Create an NSSA for the specified area ID.
Configure the NSSA so that summary LSAs are not
advertised into the NSSA.
Configure the translator role of the NSSA.
• always — The router assumes the role of the translator
when it becomes a border router.
• candidate — The router can participate in the translator
election process when it attains border router status.
Configure the translator stability interval of the NSSA.
integer
The
translator continues to perform its duties after it
determines that its translator status has been deposed by
another router. (Range: 0–3600)
Configure the metric value and type for the default route
advertised into the NSSA. The metric type can be
] comparable (nssa-external 1) or non-comparable (nssa-
external 2).
Prevent learned external routes from being redistributed
to the NSSA.
Exit to Global Config mode.
Exit to Privileged EXEC mode.
View the configuration and status of an OSPF area.
variable is the period of time that an elected
Configuring OSPF and OSPFv3
1005