Diffserv Class Configuration For Ipv6 - Dell M6220 User Configuration Manual

CLI Command
match srcip
match srcl4port
match vlan

DiffServ Class Configuration for IPv6

Beginning in Privileged Exec mode, use the following commands to configure
DiffServ classes for IPv6 and view related information.
CLI Command
configure
class-map match-all
name
ipv6
match any
match class-map
match dstip6
match dstl4port
match ip6flowlbl
match ip dscp
1142
Configuring Differentiated Services
Description
Add to the specified class definition a match
condition based on the source IP address of a
packet.
Add to the specified class definition a match
condition based on the source layer 4 port of a
packet using a single keyword, a numeric notation,
or a numeric range notation.
Add to the specified class definition a match
condition based on the value of the layer 2 VLAN
Identifier field.
Description
Enter global configuration mode.
class-map-
Define a new DiffServ class.
Configure a match condition for all the packets.
Add to the specified class definition the set of
match conditions defined for another class.
Add to the specified class definition a match
condition based on the destination IPv6 address of a
packet.
Add to the specified class definition a match
condition based on the destination layer 4 port of a
packet using a single keyword, or a numeric
notation.
Add to the specified class definition a match
condition based on the IPv6 flow label of a packet.
Add to the specified class definition a match
condition based on the value of the IP DiffServ
Code Point (DSCP) field in a packet.