Viewing And Clearing Lldp Information - Dell M6220 User Configuration Manual

Command
lldp notification
lldp transmit-tlv [sys-
desc][sys-name][sys-
cap][port-desc]
exit
exit
show lldp interface all

Viewing and Clearing LLDP Information

Beginning in Privileged EXEC mode, use the following commands to view
transmitted and received LLDP information and to view and clear LLDP
statistics.
Command
show lldp local-device
interface
{all | | detail
interface
}
show lldp remote-device
interface
{all | | detail
interface
}
clear lldp remote-data
show lldp statistics
clear lldp statistics
Purpose
Enable remote data change notifications on the interface.
Specify which optional type-length-value settings (TLVs)
in the 802.1AB basic management set will be transmitted
in the LLDP PDUs.
• sys-name — Transmits the system name TLV
• sys-desc — Transmits the system description TLV
• sys-cap — Transmits the system capabilities TLV
• port desc — Transmits the port description TLV
Exit to Global Config mode.
Exit to Privileged EXEC mode.
View LLDP settings for all interfaces.
Purpose
View LLDP information advertised by all ports or the
specified port. Include the keyword detail to see additional
information.
View LLDP information received by all ports or by the
specified port. Include the keyword detail to see additional
information.
Delete all LLDP information from the remote data table.
View LLDP traffic statistics.
Reset the LLDP statistics counters to zero.
Discovering Network Devices
681