Mrouter Status - Dell M6220 User Configuration Manual

Removing a Bridge Multicast Group
To delete a bridge multicast group:
1 Open the Bridge Multicast Group page.
2 Select the VLAN ID associated with the bridge multicast group to be
removed from the drop-down menu.
The Bridge Multicast Address and the assigned ports/LAGs display.
3 Check the Remove check box.
4 Click Apply.
The selected bridge multicast group is removed, and the device is updated.

MRouter Status

Use the MRouter Status page to display the status of dynamically learned
multicast router interfaces.
To access this page, click Switching → Multicast Support → MRouter Status
in the navigation panel.
Figure 25-4. MRouter Status
720
Configuring L2 Multicast Features