Dell M6220 User Configuration Manual page 502

Command
dot1x timeout supp-
seconds
timeout
dot1x max-req
dot1x max-users
CTRL + Z
dot1x re-authenticate
interface
[ ]
dot1x initialize
interface
[ ]
show dot1x [interface
interface]
show dot1x interface
interface
statistics
Configuring 802.1X Settings for RADIUS-Assigned VLANs
Beginning in Privileged EXEC mode, use the following commands to
configure 802.1X settings that affect the RADIUS-assigned VLAN.
Command
configure
aaa authorization
network default radius
502
Configuring Port and System Security
Purpose
Set the time that the switch waits for a response before
retransmitting an Extensible Authentication Protocol
(EAP)-request frame to the client.
count
Set the maximum number of times that the switch sends
an Extensible Authentication Protocol (EAP)-request
frame (assuming that no response is received) to the client
before restarting the authentication process.
users
Set the maximum number of clients supported on the port
when MAC-based 802.1X authentication is enabled on the
port.
Exit to Privileged EXEC mode.
Manually initiate the re-authentication of all 802.1X-
enabled ports or on the specified 802.1X-enabled port.
interface
The
number.
Start the initialization sequence on all ports or on the
specified port.
NOTE:
for the specified port is auto or MAC-based.
View 802.1X settings for the switch or for the specified
interface.
View 802.1X statistics for the specified interface.
Purpose
Enter Global Configuration mode.
Allow the RADIUS server to assign VLAN IDs to clients.
variable includes the interface type and
This command is valid only if the port-control mode