Configuring Ieee 802.1X (Cli) - Dell M6220 User Configuration Manual

Configuring IEEE 802.1X (CLI)

This section provides information about commands you use to configure
802.1X and Port Security settings. For additional information about the
commands in this section, see the
M6220/M6348/M8024/M8024-k CLI Reference Guide
support.dell.com/manuals.
Configuring Basic 802.1X Authentication Settings
Beginning in Privileged EXEC mode, use the following commands to enable
and configure 802.1X authentication on the switch.
Command
configure
aaa accounting dot1x
default
aaa authentication
method1
dot1x default
dot1x system-auth-
control
interface
interface
PowerConnect
Purpose
Enter Global Configuration mode.
Sets 802.1X accounting to the default operational mode
Specify the authentication method to use to authenticate
802.1X clients that connect to the switch.
method1
—The method keyword can be radius, none, or
ias.
Globally enable 802.1X authentication on the switch.
Enter interface configuration mode for the specified
interface
interface. The
and number, for example gigabitethernet 1/0/3.
You can also specify a range of interfaces with the interface
range command, for example, interface range
gigabitethernet 1/0/8-12 configures interfaces 8, 9, 10, 11,
and 12.
Configuring Port and System Security
at
variable includes the interface type
499