Configuring A Time Range - Dell M6220 User Configuration Manual

Command
CTRL + Z
show ipv6 access-lists
name
[ ]

Configuring a Time Range

Beginning in Privileged EXEC mode, use the following commands to create a
time range and configure time-based entries for the time range.
Command
configure
name
time-range
time
absolute {[start
date time date
] [end
Purpose
Exit to Privileged EXEC mode.
Display all IPv6 access lists and all of the rules that are
defined for the IPv6 ACL. Use the optional
parameter to identify a specific IPv6 ACL to display.
Purpose
Enter global configuration mode.
Create a named time range and enter the Time-Range
Configuration mode for the range.
Configure a nonrecurring time entry for the named time
]} range.
time date
• start
going into effect. The time is expressed in a 24-hour
clock, in the form of hours:minutes. For example, 8:00 is
8:00 am and 20:00 is 8:00 pm. The date is expressed in
the format day month year. If no start time and date are
specified, the configuration statement is in effect
immediately.
time date
• end
longer in effect.
— Time and date the ACL rule starts
— Time and date the ACL rule is no
Configuring Access Control Lists
name
549