Default Diffserv Values - Dell M6220 User Configuration Manual

Hide thumbs Also See for M6220:

Table of Contents

PowerConnect M6220/M6348/M8024/M8024-k switch software supports

the Traffic Conditioning Policy type which is associated with an inbound

traffic class and specifies the actions to be performed on packets meeting

the class rules:

Marking the packet with a given DSCP, IP precedence, or CoS value.

Traffic to be processed by the DiffServ feature requires an IP header if

the system uses IP Precedence or IP DSCP marking.

Policing packets by dropping or re-marking those that exceed the

class's assigned data rate.

Counting the traffic within the class.

Service: Assigns a policy to an interface for inbound traffic.

You can use an 802.1X authenticator or RADIUS server to dynamically

assign DiffServ filters to ports when a host connects to a port and authenticates

by using 802.1X. For more information, see "How Does the Authentication Server

Assign DiffServ Filters?" on page 489

Default DiffServ Values

Table 40-1 shows the global default values for DiffServ.

Table 40-1. DiffServ Global Defaults

Default Value

None configured

Configuring Differentiated Services

M8024 M6348 M8024-k