Dell M6220 User Configuration Manual page 400

Command
rcvr-index
sflow
if_type if_number poll-
interval
rcvr-index
sflow
if_type
sampling
if_number sampling-rate
size
[ ]
interface
interface
rcvr-index
sflow
poll-interval
rcvr-index
sflow
sampling-rate size
[
400
Monitoring Switch Traffic
Purpose
polling Enable a new sFlow poller instance on an interface range.
rcvr-index
•
poller (Range: 1–8).
if_type if_number
•
interface type can be Gigabitethernet (gi) or
Tengigabitethernet (te), for example gi1/0/3-5 enables
polling on ports 3, 4, and 5.
poll-interval
•
value of
generated. (Range: 0–86400).
Enable a new sflow sampler instance for the specified
interface range.
rcvr-index
•
to which flow samples are to be sent.
if_type if_number
•
interface type can be Gigabitethernet (gi) or
Tengigabitethernet (te), for example gi1/0/3-5 enables
polling on ports 3, 4, and 5.
sampling-rate
•
sampling from this source. A sampling rate of 1 counts all
packets. A value of
packets, 1 packet will be sampled. (Range: 1024 - 65536).
size
• — The maximum number of bytes that should be
copied from the sampler packet (Range: 20 - 256 bytes).
Enter interface configuration mode for the specified
interface. The
and number, for example gigabitethernet 1/0/3 or gi1/0/3.
You can also specify a range of interfaces with the interface
range command, for example, interface range
gigabitethernet 1/0/8-12 configures interfaces 8, 9, 10, 11,
and 12.
polling Enable a new sFlow poller instance for the interface.
sampling Enable a new sflow sampler instance for the interface.
]
— The sFlow Receiver associated with the
— The list of interfaces to poll. The
— The sFlow instance polling interval. A
n n
means once in seconds a counter sample is
— The sFlow Receiver for this sFlow sampler
— The list of interfaces to sample. The
— The statistical sampling rate for packet
n
means that out of
interface
variable includes the interface type
n
incoming