Dell M6220 User Configuration Manual page 519

Configuring Port Security Configuration (Web)
This section provides information about the OpenManage Switch
Administrator pages for configuring and monitoring the IEEE 802.1X
features and Port Security on a PowerConnect
M6220/M6348/M8024/M8024-k switch. For details about the fields on a page,
click at the top of the page.
Port Security
Use the Port Security page to enable MAC locking on a per-port basis. When
a port is locked, you can limit the number of source MAC addresses that are
allowed to transmit traffic on the port.
To display the Port Security page, click Switching → Network Security →
Port Security in the navigation panel.
Figure 19-11. Network Security Port Security
Configuring Port Security Settings on Multiple Ports
To configure port security on multiple ports:
1 Open the Port Security page.
2 Click Show All to display the Port Security Table page.
Configuring Port and System Security
519