Configuring Router Discovery (Irdp) - Dell M6220 User Configuration Manual

Configuring Router Discovery (IRDP)

Beginning in Privileged EXEC mode, use the following commands to
configure IRDP settings.
Command
configure
interface
interface
ip irdp
ip-address
ip irdp address
seconds
ip irdp holdtime
ip irdp maxadvertinterval
seconds
ip irdp minadvertinterval
seconds
ip irdp preference
exit
exit
show ip irdp [vlan
Purpose
Enter global configuration mode.
Enter interface configuration mode for the specified
VLAN routing interface. The
the interface type (vlan) and number, for example vlan
100.
Enable IRDP on the interface.
Configure the address that the interface uses to send the
router discovery advertisements.
The allowed addresses are 224.0.0.1 (all-hosts IP
multicast address) or 255.255.255.255 (limited broadcast
address)
Configure the value of the holdtime field of the router
advertisement sent from this interface.
Configure the maximum time allowed between sending
router advertisements from the interface.
Configure the minimum time allowed between sending
router advertisements from the interface.
integer
Configure the preference of the address as a default
router address relative to other router addresses on the
same subnet.
Exit to Global Config mode.
Exit to Privileged EXEC mode.
vlan-id
] View the router discovery information for all interfaces,
or for a specified interface.
interface
variable includes
Configuring IP Routing
925