Configuring Ipv6 Neighbor Discovery - Dell M6220 User Configuration Manual

Configuring IPv6 Neighbor Discovery

Use the following commands to configure IPv6 Neighbor Discovery settings.
Command
ipv6 nd prefix
prefix/prefix-length
valid-lifetime
[{ |
preferred-
infinite} {
lifetime
| infinite}]
[no-autoconfig] [off-
link]
ipv6 nd ra-interval
maximum minimum
ipv6 nd ra-lifetime
seconds
ipv6 nd suppress-ra
ipv6 nd dad attempts
value
Purpose
Configure parameters associated with network prefixes that
the router advertises in its Neighbor Discovery
advertisements.
• ipv6-prefix—IPv6 network prefix.
prefix-length
• —IPv6 network prefix length.
valid-lifetime
• —Valid lifetime of the router in seconds.
(Range: 0–4294967295 seconds.)
• infinite—Indicates lifetime value is infinite.
preferred-lifetime
•
seconds. (Range: 0–4294967295 seconds.)
• no-autoconfig—Do not use the prefix for auto
configuration.
• off-link—Do not use the prefix for onlink determination.
Set the transmission interval between router Neighbor
Discovery advertisements.
maximum
• — The maximum interval duration (Range:
4–1800 seconds).
minimum
• — The minimum interval duration (Range: 3 –
(0.75 * maximum) seconds).
Set the value that is placed in the Router Lifetime field of
the router Neighbor Discovery advertisements sent from the
interface.
seconds
The value must be zero, or it must be an integer
between the value of the router advertisement transmission
interval and 9000 seconds. A value of zero means this router
is not to be used as the default router. (Range: 0-9000).
Suppress router advertisement transmission on an interface.
Set the number of duplicate address detection probes
transmitted while doing Neighbor Discovery.
value
The range for
—Preferred-lifetime of the router in
is 0–600.
Configuring IPv6 Routing
1097