Configuring Protected Ports - Dell M6220 User Configuration Manual

Hide thumbs Also See for M6220:
Table of Contents

Advertisement

Command
CTRL + Z
show interfaces detail
interface
show storm-control
show storm-control
interface
[
| all]

Configuring Protected Ports

Beginning in Privileged EXEC mode, use the following commands to add a
name to a protected port group and add ports to the group.
Command
configure
switchport protected
groupid
name
name
interface
interface
switchport protected
groupid
CTRL + Z
show switchport
protected
Purpose
Exit to Privileged EXEC mode.
Display detailed information about the specified interface,
including the flow control status.
View whether 802.3x flow control is enabled on the switch.
View storm control settings for all interfaces or the
specified interface.
Purpose
Enter global configuration mode.
Specify a name for one of the three protected port groups.
groupid
— Identifies which group the port is to be
protected in. (Range: 0-2)
name
— Name of the group. (Range: 0-32 characters)
Enter interface configuration mode for the specified
interface
interface. The
and number, for example gigabitethernet 1/0/3.
Add the interface to the specified protected port group.
Exit to Privileged EXEC mode.
View protected group and port information.
Configuring Port-Based Traffic Control
variable includes the interface type
699

Advertisement

Table of Contents
loading

This manual is also suitable for:

M8024M6348M8024-k

Table of Contents