Configuring Dhcpv6 Interface Information - Dell M6220 User Configuration Manual

Configuring DHCPv6 Interface Information

Beginning in Privileged EXEC mode, use the following commands to
configure an interface as a DHCPv6 server or a DHCPv6 relay agent. The
server and relay functionality are mutually exclusive. In other words, a VLAN
routing interface can be configured as a DHCPv6 server or a DHCPv6 relay
agent, but not both.
Command
configure
interface {tunnel
tunnel-id vlan-id
| vlan
ipv6 dhcp relay
relay-
{destination
address
[interface vlan
vlan-id
] | interface vlan
vlan-id
} [remote-id
user-
{duid-ifid |
defined-string
}]
exit
interface {tunnel
tunnel-id vlan-id
| vlan
Purpose
Enter Global Configuration mode.
Enter interface configuration mode for a tunnel or VLAN
} routing interface to configure as a DHCPv6 relay agent.
Configure the interface for DHCPv6 relay functionality.
• destination — Keyword that sets the relay server IPv6
address.
relay-address
•
server.
• interface — Sets the relay server interface.
vlan-id
• — A valid VLAN ID.
• [remote-id {duid-ifid |
Relay Agent Information Option "remote ID" sub-option
to be added to relayed messages. This can either be the
special keyword duid-ifid, which causes the "remote ID"
to be derived from the DHCPv6 server DUID and the
relay interface number, or it can be specified as a user-
defined string.
Exit to Global Configuration Mode
Enter interface configuration mode for a tunnel or VLAN
} routing interface to configure with DHCPv6 server
functionality.
Configuring DHCPv6 Server and Relay Settings
— An IPv6 address of a DHCPv6 relay
user-defined-string
}] — The
1119