Configuring Email Alerts For Log Messages - Dell M6220 User Configuration Manual

Hide thumbs Also See for M6220:
Table of Contents

Advertisement

Configuring Email Alerts for Log Messages

Beginning in Privileged EXEC mode, use the following commands to
configure email alerts so that log messages are sent to the specified address.
Command
configure
logging email [
logging email urgent
severity
{
| none}
logging email logtime
minutes
logging email message-
type {urgent | non-
urgent | both} to-addr
email-address
logging email from-addr
email-address
logging email message-
type {urgent | non-
urgent | both} subject
subject
236
Monitoring and Logging System Information
Purpose
Enter Global Configuration mode.
severity
] Enable email alerting and determine which non-critical log
messages should be emailed. Including the
sets the lowest severity for which log messages are emailed.
These messages are collected and sent in a single email at
the configured log duration.
severity
severity level for non-critical messages. Log messages at or
above this severity level are emailed. For information about
severity levels, see Table 10-1. Log messages below the
specified level are not emailed.
Determine which log messages are critical and should be
sent in a single email as soon as they are generated.
severity
severity level for critical messages. For information about
severity levels, see Table 10-1.
Specify how often to send the non-critical email alerts that
have been collected. . The valid range is 30 - 1440 minutes.
Specify the email address of the recipient for log messages.
Specify the email address of the sender, which is the
switch.
Specify the text that will appear in the subject line of email
alerts sent by the switch.
— (Optional) Enter the number or name of the
— (Optional) Enter the number or name of the
severity
value

Advertisement

Table of Contents
loading

This manual is also suitable for:

M8024M6348M8024-k

Table of Contents