Dell M6220 User Configuration Manual page 300

Table 12-1. SNMP Defaults
Parameter
QoS traps
Multicast traps
Captive Portal traps
OSPF traps
Table 12-2 describes the two views that are defined by default.
Table 12-2. SNMP Default Views
View Name
Default
DefaultSuper
By default, three groups are defined. Table 12-3 describes the groups. The
Read, Write, and Notify values define the preconfigured views that are
associated with the groups.
Table 12-3. SNMP Default Groups
Group Name
DefaultRead
DefaultWrite
DefaultSuper
300
Configuring SNMP
OID Subtree
iso
snmpVacmMIB
usmUser
snmpCommunityTable
iso
Security Level
No Auth No Priv
No Auth No Priv
No Auth No Priv
Default Value
Enabled
Disabled
Disabled
Disabled
Read Write
Default –
Default Default
DefaultSuper DefaultSuper
View Type
Included
Excluded
Excluded
Excluded
Included
Notify
Default
Default
DefaultSuper