Which Radius Attributes Does The Switch Support - Dell M6220 User Configuration Manual

If you use a RADIUS server to authenticate users, you must configure user
attributes in the user database on the RADIUS server. The user attributes
include the user name, password, and privilege level.
NOTE:
To set the privilege level, it is recommended to use the Service-Type
attribute instead of the Cisco AV pair priv-lvl attribute.

Which RADIUS Attributes Does the Switch Support?

Table 9-5 lists the RADIUS attributes that the switch supports and indicates
whether the 802.1X feature, user management feature, or Captive Portal
feature supports the attribute. You can configure these attributes on the
RADIUS server(s) when utilizing the switch RADIUS service.
Table 9-5. Supported RADIUS Attributes
Type RADIUS Attribute Name
1 USER-NAME
2 USER-PASSWORD
4 NAS-IP-ADDRESS
5 NAS-PORT
6 SERVICE-TYPE
11 FILTER-ID
12 FRAMED-MTU
15 LOGIN-SERVICE
18 REPLY-MESSAGE
24 STATE
25 CLASS
26 VENDOR-SPECIFIC
27 SESSION-TIMEOUT
28 IDLE-TIMEOUT
29 TERMINATION-ACTION
30 CALLED-STATION-ID
198
Configuring Authentication, Authorization, and Accounting
802.1X User Manager
Yes Yes
Yes Yes
Yes No
Yes Yes
No Yes
Yes No
Yes No
No Yes
Yes Yes
Yes Yes
Yes No
No Yes
Yes No
No No
Yes No
Yes No
Captive Portal
No
No
No
No
No
No
No
No
No
No
Yes
Yes
Yes
No
No