Basic Failover - Dell M6220 User Configuration Manual

• NSF and the Storage Access Network
• NSF and Routed Access

Basic Failover

In this example, the stack has four members that are connected in a ring
topology, as Figure 8-13 shows.
Figure 8-13. Basic Stack Failover
When all four units are up and running, the show switch CLI command gives
the following output:
console#show switch
SW Management
Status
--- ---------
1 Stack Member
2 Stack Member
3 Mgmt Switch
4 Stack Member
170
Managing a Switch Stack
Standby Preconfig
Status Model ID
------- --------
PCM6348
PCM6348
PCM6348
PCM6348
Plugged- Switch
in Model Status
ID
--------- ------- --------
PCM6348 OK
PCM6348 OK
PCM6348 OK
PCM6348 OK
Code
Version
9.19.0.2
9.19.0.2
9.19.0.2
9.19.0.2