Tacacs+ Authentication Example - Dell M6220 User Configuration Manual

Hide thumbs Also See for M6220:
Table of Contents

Advertisement

The username guest password password command creates a
user with the name "guest" and password "password". A simple password
can be configured here, since strength-checking has not yet been enabled.
The passwords strength minimum numeric-characters 2
command sets the minimum number of numeric characters required when
password strength checking is enabled. This parameter is enabled only if
the passwords strength minimum character-classes
parameter is set to something greater than its default value of 0.
The passwords strength minimum character-classes 4
command sets the minimum number of character classes that must be
present in the password. The possible character classes are: upper-case,
lower-case, numeric and special.
The passwords strength-check command enables password
strength checking.
The username admin password paSS1&word2 privilege
15 command creates a user with the name "admin" and password
"paSS1&word2". This user is enabled for privilege level 15. Note that,
because password strength checking was enabled, the password was
required to have at least two numeric characters, one uppercase character,
one lowercase character, and one special character.
The passwords lock-out 3 command locks out a local user after
three failed login attempts.
This configuration allows either user to log into the switch. Both users will
have privilege level 1. Neither user will be able to successfully execute the
enable command, which grants access to Privileged EXEC mode, because
there is no enable password set by default (the default method list for telnet
enable authentication is only the "enable" method).
NOTE:
It is recommend that the password strength checking and password
lockout features be enabled when using local users.

TACACS+ Authentication Example

Use the following configuration to require TACACS+ authentication when
logging in over a telnet connection:
aaa authentication login "tacplus" tacacs
188
Configuring Authentication, Authorization, and Accounting

Advertisement

Table of Contents
loading

This manual is also suitable for:

M8024M6348M8024-k

Table of Contents