Settings - ABB REB650 Technical Manual

Section 12
Monitoring
12.1.7.4
Table 205: VNMMXU Non group settings (basic)
Name Values (Range)
Operation Disabled
Enabled
GlobalBaseSel 1 - 6
VDbRepInt 1 - 300
VMax 0 - 2000000
VRepTyp Cyclic
Dead band
Int deadband
VLimHys 0.000 - 100.000
VAngDbRepInt 1 - 300
Table 206: VNMMXU Non group settings (advanced)
Name Values (Range)
VZeroDb 0 - 100000
VHiHiLim 0 - 2000000
VHiLim 0 - 2000000
VLowLim 0 - 2000000
VLowLowLim 0 - 2000000
VMin 0 - 2000000
236
Name Type
VB_RANGE INTEGER
VB_ANGL REAL
V_C REAL
VC_RANGE INTEGER
VC_ANGL REAL

Settings

Unit Step
- -
- 1
Type 1
V 1
- -
V 0.001
Type 1
Unit Step
m% 1
V 1
V 1
V 1
V 1
V 1
Description
V_B Amplitude range
V_B Angle, magnitude of reported value
V_C Amplitude, magnitude of reported value
V_C Amplitude range
VC Angle, magnitude of reported value
Default Description
Disabled Disbled/Enabled operation
1 Selection of one of the Global Base Value
groups
10 Cycl: Report interval (s), Db: In % of range,
Int Db: In %s
106000 Maximum value
Dead band Reporting type
5.000 Hysteresis value in % of range and is
common for all limits
10 Cycl: Report interval (s), Db: In % of range,
Int Db: In %s
Default Description
500 Zero point clamping in 0.001% of range
96000 High High limit (physical value)
86000 High limit (physical value)
71000 Low limit (physical value)
66000 Low Low limit (physical value)
0 Minimum value
1MRK 505 277-UUS C
Technical Manual