Settings - ABB REB650 Technical Manual

Section 10
Control
10.1.3.5
Table 98: LOCREM Non group settings (basic)
Name Values (Range)
ControlMode Internal LR-switch
External LR-switch
10.1.4
10.1.4.1
10.1.4.2
10.1.4.3
162

Settings

Unit Step
- -
Local remote control LOCREMCTRL
Identification
Function description
Local remote control
Functionality
The signals from the local HMI or from an external local/remote switch are applied via
the function blocks LOCREM and LOCREMCTRL to the Bay control (QCBAY)
function block. A parameter in function block LOCREM is set to choose if the switch
signals are coming from the local HMI or from an external hardware switch connected
via binary inputs.
Function block
LOCREMCTRL
^PSTO1 ^HMICTR1
^PSTO2 ^HMICTR2
^PSTO3 ^HMICTR3
^PSTO4 ^HMICTR4
^PSTO5 ^HMICTR5
^PSTO6 ^HMICTR6
^PSTO7 ^HMICTR7
^PSTO8 ^HMICTR8
^PSTO9 ^HMICTR9
^PSTO10 ^HMICTR10
^PSTO11 ^HMICTR11
^PSTO12 ^HMICTR12
IEC09000074_1_en.vsd
IEC09000074 V1 EN
Figure 66: LOCREMCTRL function block
Default Description
Internal LR-switch Control mode for internal/external LR-switch
IEC 61850 IEC 60617
identification identification
LOCREMCTRL -
1MRK 505 277-UUS C
ANSI/IEEE C37.2
device number
-
Technical Manual