Ied Identifiers Terminalid - ABB REB650 Technical Manual

Section 15
Basic IED functions
15.6
15.6.1
15.6.2
15.6.3
Table 339: TERMINALID Non group settings (basic)
Name Values (Range)
StationName 0 - 18
StationNumber 0 - 99999
ObjectName 0 - 18
ObjectNumber 0 - 99999
Table continues on next page
396
• Set system time
• Enter and exit from test mode
• Change of active setting group
The binary input signal LOCK controlling the function is defined in ACT or SMT:
Binary input
1
0

IED identifiers TERMINALID

Identification
Function description
IED identifiers
Functionality
IED identifiers (TERMINALID) function allows the user to identify the individual IED
in the system, not only in the substation, but in a whole region or a country.
Use only characters A-Z, a-z and 0-9 in station, object and unit names.
Settings
Unit Step
- 1
- 1
- 1
- 1
Function
Activated
Deactivated
IEC 61850 IEC 60617
identification identification
TERMINALID
Default Description
Station name Station name
0 Station number
Object name Object name
0 Object number
1MRK 505 277-UUS C
ANSI/IEEE C37.2
device number
- -
Technical Manual