Function Commands Generic For Iec 60870-5-103 I103Gencmd - ABB REB650 Technical Manual

1MRK 505 277-UUS C
Name Values (Range)
InfNo_2 1 - 255
InfNo_3 1 - 255
InfNo_4 1 - 255
InfNo_5 1 - 255
InfNo_6 1 - 255
InfNo_7 1 - 255
InfNo_8 1 - 255
10.10
10.10.1
10.10.2
10.10.3
Technical Manual
Unit Step
- 1
- 1
- 1
- 1
- 1
- 1
- 1
Function commands generic for IEC 60870-5-103
I103GENCMD
Functionality
I103GENCMD is used for transmitting generic commands over IEC 60870-5-103. The
function has two outputs signals CMD_OFF and CMD_ON that can be used to
implement double-point command schemes.
Function block
I103GENCMD
BLOCK ^CMD_OFF
^CMD_ON
IEC10000285-1-en.vsd
IEC10000285 V1 EN
Figure 75: I103GENCMD function block
Signals
Table 126: I103GENCMD Input signals
Name Type
BLOCK BOOLEAN
Table 127: I103GENCMD Output signals
Name Type
CMD_OFF BOOLEAN
CMD_ON BOOLEAN
Default Description
2 Information number for output 2 (1-255)
3 Information number for output 3 (1-255)
4 Information number for output 4 (1-255)
5 Information number for output 5 (1-255)
6 Information number for output 6 (1-255)
7 Information number for output 7 (1-255)
8 Information number for output 8 (1-255)
Default Description
0 Block of command
Description
Command output OFF
Command output ON
Section 10
Control
183