Local Hmi Signals; Identification - ABB REB650 Technical Manual

Section 5
Local Human-Machine-Interface LHMI
5.2
5.2.1
5.2.2
5.2.3
48

Local HMI signals

Identification

Function description
Local HMI signals
Function block
LHMICTRL
CLRLEDS HMI-ON
RED-S
YELLOW-S
YELLOW-F
CLRPULSE
LEDSCLRD
IEC09000320-1-en.vsd
IEC09000320 V1 EN
Figure 3: LHMICTRL function block
Signals
Table 11: LHMICTRL Input signals
Name Type
CLRLEDS BOOLEAN
Table 12: LHMICTRL Output signals
Name Type
HMI-ON BOOLEAN
RED-S BOOLEAN
YELLOW-S BOOLEAN
YELLOW-F BOOLEAN
CLRPULSE BOOLEAN
LEDSCLRD BOOLEAN
IEC 61850 IEC 60617
identification identification
LHMICTRL -
Default Description
0 Input to clear the LCD-HMI LEDs
Description
Backlight of the LCD display is active
Red LED on the LCD-HMI is steady
Yellow LED on the LCD-HMI is steady
Yellow LED on the LCD-HMI is flashing
A pulse is provided when the LEDs on the LCD-HMI
are cleared
Active when the LEDs on the LCD-HMI are not active
1MRK 505 277-UUS C
ANSI/IEEE C37.2
device number
-
Technical Manual