Depth Settings; Land Settings; Chart Settings - Standard Horizon CP500 Owner's Manual

Tracks & Routes

12.0.8 Depth Settings

Controls the depth information on the Chart page.
Depth Range Min
Depth Range Max

12.0.9 Land Settings

To control the display on the map of the terrestrial features.
Land Elevations
Land Elevation Values : Turns the Land Elevation Values On or Off.
Roads
Points Of Interest
12.0.10

Chart Settings

Settings that control how the chart features will be shown on the Chart page of the GPS
Chart Plotter.
CP500
: Turns the Tracks and Routes On or Off (recommended and established routes for ships at
sea, including traffic separation schemes, deep water routes).
: Sets the minimum depth limit to show Depth Soundings, Bathymetric Lines and Depth
Areas.
: Sets the max depth limit to show Depth Soundings, Bathymetric Lines and Depth Areas.
Figure 12.0.8 - Depth Settings
: Turns the Land Elevations On or Off.
: Turns the Roads On or Off.
: Turns the Points of Information On or Off.
Figure 12.0.9 - Example of Roads and Points Of Interest
Page 79